Corrugated Carton Flexo Printing Machine with Stacker High Speed
100 Pcs / Min
Main Technical Parameter:
|2||Max.coverage size||mm||1080 x|
|1080x 2400||1200x 2000||1200x|
|1500x2400||1500x 2800||1750x 2400||1750x 2800|
|3||Min finish size||mm||260x|
Function and Characteristics:
1, Whole machine electric parts was choice the famous brand,good
quality and steady.
2, Complete machine baffle and important parts was used the temper
for decrease the metal internal force, and the parts was made by
high precision center and grinder by digit-controlled grinder.
3, All the transmission axle and roller are made by the
high-quality steel, temper, and dynamic balance, plate with rigid
chrome and grinned surface.
4, All the Transmission gear was used the 45# alloy steel,which is
grinded after heat-treatment,and it was made by rubbing, it still
maintains the high topping precision.
5, The whole machine undergoes the spray lubrication, intuitionist
show setting, setting the double oil pipe balance system.
6, Whole machine working interval adjustment, self-lock worm wheel
and worm device, fast and convenient.
Option: CeramixAnilox roller, Stacker.
Function of Feeding Department
1, Control panel function button putting concentrate and simple,
2, Electrically controlled the connecting and separated for the
even/ unit with alarm to ensure the operator safety during its
3, The left and right baffle, kick feeding, back baffle was adopted
4, Brush and the top suction device at the inlet which can clear
away the impurity from the paper face to improve the printing
5, Mainframe was controlled by the frequency conversion, start-up
and running steady, which can save the power about the 30%.
6, Infrared photoelectricity counter can presetting the order paper
7, One lock function for whole machine, which can avoid the damaged
the machine with error operation ( Main motor start running, every
unit will be lock automatic).
8, Pressure model elasticity feeding rubber roller, which can not
to damaged the strength for corrugated cardboard.
9, Option: outside baffle add the flap function, which made the
cardboard orientation more exact, avoid to waste.
Option: kick feeding paper or lead edge feeding paper.
Function of printing Department
1, All the axle and roller was used the high grade steel, computer
dynamic balance. Eliminate the centrifugal effect, plated with
rigid chrome and grinded surface.
2, Printing phases was adopted the planetary gear structure, the
electric digit 360 adj istra nt, show the dgt(stop, running can
3, Printing roller landscape orientation was adopted the touch
screen control, and electric digit adjustment, the adjustment scope
4, Pneumatic pump supply the ink.
5, Hanging plate device, total hanging and half hanging slotting
notch, foot switch control the clockwise and counter-clockwise,
fast to fixing and take down the plate.
6, Fixing the oil interval, printing pressure roller, lead roller
interval were used the free-spanner self-lock worm wheel and worm
device adjustment and fix.
7, Printing phase fix was used the pneumatic brake structure, the
brake structure will stop the mainframe running when the every unit
separated, which can keep the origin gear fix position can not
8, Reposition function, before reposition, comp any memory printing
position, it can automatic reset after reposition.
9, Rubber roller, and the surface wrapped wear rubber, special
grinding effect of Transfer ink.
10, Steel anilox roller, steel face chrome pressure the anilox and
11, Pneumatic uplift plate device, the anilox roller break away
pneumatic, smooth the oil automatic when the machine not printing,
it can prevent the oil dry.
Function of Slotting Department
1, Slotting phases was adopted the planetary gear structure, the
electric digit 360 adj ist ra nt, show the d gt(stop, running can
2, Slotting tool rest pressure wheel, horizontal move by electric
mechanic joint adjustment.
3, The height of box size was adjustment synchronous.
4, Pressure interval was used the free-spanner self-lock worm wheel
and worm device adjustment and fix.
5, The elastic tangential scraper structure could cut off three and
five layer cardboard without any adjustment.
6, Slotting knife was choice with the high quality alloy steel,
which made the rigidity and tenacity was best when heat treatment,
it can suitable long-term used.
7, It could be equipped with portable punching die holder.
Option: Computer double shaft slotting adjustment.
Function of Die Cutting Department
1, The die cutter phase is controlled by computer and electric
2, The die cutting scraper could be adjusted horizontally with
manual control ranging from 10mm.
3, The glue roller cuts the trimming mechanism and the cushion
could be used for many times and save The use cost to a great deal.
4, The cushion roller mechanical, horizontal and facility from
+30mm to -30mm could raise the service life of The cushion of the
5, Used the die cutting equalizer, providing wire-speed
compensation, be ensure the carton forming same size after repair
Option: Contain slotter circle blade